mily@benefication.com    +8618379873189
Cont

Have any Questions?

+8618379873189

Jun 18, 2024

Classification of magnetic separators

Classification of magnetic separators

To meet the needs of different working conditions, magnetic separators come in various forms. Generally classified according to the following methods. (1) Classified by magnetic source:

1) Electromagnetic magnetic separator: using an electromagnetic system to generate a magnetic field by applying current. 2) Permanent magnet separator: generates a magnetic field using a permanent magnet system. (2) Classified by magnetic field intensity:

1) Weak magnetic field separator: used for separating strong magnetic minerals. 2) Strong magnetic field separator: used for separating weakly magnetic minerals. (3) Classified by medium:

1) Dry magnetic separator: performs magnetic separation in the air, suitable for cold and water scarce areas.

2) Wet magnetic separator: used for magnetic separation in water, mainly for separating fine-grained strong magnetic minerals. (4) Classified by structural characteristics:

There are cylinder type, pulley type, roller type, disc type, belt type, ring type, etc.

The currently widely used is a weak magnetic field wet permanent magnet cylindrical magnetic separator.

2, Construction of weak magnetic field wet permanent magnet cylindrical magnetic separator

There are three types of slots in the permanent magnet cylinder type selection machine: forward flow slot, reverse flow slot, and semi reverse flow slot. Figures 9-17 show a semi inverse

Flow type permanent magnet cylindrical magnetic separator. The structure of the other two slot magnetic separators is basically the same.


笔记
 

wet magnetic separator

                                                                                          Figures 9-17

                                               Semi counter current  wet drum permanent magnetic separator

(1) Permanent magnet cylinder

The water magnetic cylinder is composed of a cylinder, a magnetic system, and a central axis. It generates a magnetic field, which is the core of a magnetic separator.

The cylinder is welded from 3-4 mm thick non magnetic stainless steel plates. There are several specifications with diameters of 600mm, 750mm, 900mm, etc. There are several specifications in length, including 900mm, 1200mm, 1800mm, etc. To protect the cylinder from wear and tear, a layer of 2-4mm rubber is usually wrapped outside the cylinder.

The two ends of the simplified version are sealed with cast aluminum end caps, and the center of the end cap is equipped with a spherical rolling bearing, which is installed on the spindle. The spindle is supported on the frame.

A permanent magnet system with a fan-shaped distribution is fixed on the axis, as shown in Figures 9-18.

magnetic separator

                                       Figures 9-18.

 

The magnetic system is mainly composed of magnetic blocks and yokes. According to the diameter of the cylinder, the magnetic system has 3-5 magnetic poles. The material of the magnetic block is strontium ferrite. The magnetic blocks have specifications of 86x60xhmm and thicknesses of 15, 18, and 21mm. Usually, a magnetic pole group is composed of 5 pieces. The magnetic pole group is fixed to the magnetic yoke with copper bolts made of non magnetic materials, or glued to the magnetic yoke with epoxy resin adhesive.

The magnetic yoke is made of low-carbon steel or industrial pure iron. Its function is to connect magnetic blocks to form a radial magnetic system and play a role in magnetic conduction. The polarity of the magnetic poles alternates along the circumferential direction.

The gap between the magnetic system and the inner surface of the cylinder is 1-3mm.

 

Three discs magnetic separator

three disc magnetic separator

Three discs magnetic separator mainly used for dry separation of weak magnetic minerals, Tantalum-niobium,titanium,Tin,Iron,Tungsten,

Manganese,zircon,Monazite,etc, which have a specific magnetization strip >40×10ˉ6

Send Inquiry