
The working principle of the gold separation centrifuge/gold centrifugal concentrator is to quickly separate heavy metals from light substances (sand) through the action of gravity and centrifugal force. While utilizing the beneficiation principle of the traditional beneficiation centrifuge, it also uniquely applies recoil pressure on the internal surface of the beneficiation components to overcome the shortcomings of traditional centrifugal concentrators that reduce the recovery rate of the beneficiation due to the hardening of the ore layer during the beneficiation process. This new feature is achieved through a special method of adding a water jacket to the centrifuge.
In the gravity field of the mineral processing centrifuge, the acceleration g that determines the strength of the force field is basically a fixed value, so that the fine particles of heavy metals (gold, silver, copper, iron, lead, zinc, tin, tungsten, crucible, niobium, niobium, palladium, etc. ) In order to enhance the speed of the separation process, the inertial centrifugal force generated by the rotating flow is used to improve the movement of the centrifuge, which has been widely used in fine particle mineral processing.
In the synchronously moving rotating flow, the angular velocity a of the particle rotating motion is opposite to the centripetal acceleration of the fluid, and the numerical value corresponds to: a=²r= v²/r. In the formula: --- the angular velocity of the particle's rotational motion (rad/s); R----the radius of gyration of the particle (m); V----the tangential velocity on the particle's rotation circle (m/s). The ratio of centrifugal acceleration to gravity acceleration is called centrifugal strength: i=²/r times.

Centrifugal concentrators are commonly used in the mining industry to recover minerals such as gold, silver, and platinum group metals. These machines utilize principles of centrifugal force to separate particles based on their density.

The centrifugal concentrator consists of a rotating bowl, which is mounted on a vertical shaft. A slurry of ore is fed into the bowl and subjected to centrifugal forces generated by the rotation of the bowl. As a result, the denser particles move towards the outer edge of the bowl while the lighter particles move towards the center.
The rotation of the bowl creates a vortex within the slurry, which causes further separation of the particles based on their density. The denser particles are forced towards the outer edge of the vortex and collected in a concentrate ring while the lighter particles are discharged from the center of the bowl.

Knelson concentrator
Centrifugal concentrators are highly efficient and can achieve high recoveries of valuable minerals. They are also easy to operate and require minimal maintenance. These machines have become popular in small-scale and artisanal mining operations due to their low cost and ease of use.
In conclusion, centrifugal concentrators are an effective and efficient method for mineral recovery. They offer a simple and cost-effective solution for small-scale mining operations, helping to promote sustainable and responsible mining practices.








