Knowledge

Classifier equipment maintenance method

1. All lubricating points are lubricated with sodium-based grease or calcium-based grease. 2. Check whether the lubricating oil inside the reducer is on the line of the oil needle every shift, and cha

Read More

Installation and maintenance of classifier equipment

Installation operation 1. The machine can be installed after inspection without damage and no loose screws. The classifier should be firmly installed on the foundation of the poured concrete. The foun

Read More

Classifier equipment use

The classifier is widely used in the metal ore beneficiation process to classify the particle size of the ore slurry, and can also be used in the desliming and dewatering of the ore washing operation.

Read More

Classifier equipment structure

The classifier is mainly composed of a transmission device, a spiral body, a trough, a lifting mechanism, a lower support (bearing) and a discharge valve. The base of the machine is made of channel st

Read More

Working principle of classifier equipment

The classifier is based on the principle that the solid particles are different in size and specific gravity, so the sedimentation speed in the liquid is different, and the fine ore particles are floa

Read More

Hydrocyclone

The structural feature of the hydrocyclone is a cone with a small angle (usually 10-20b), which is currently one of the effective equipment for thickening and grading slime water. A typical static cyc

Read More

Inclined plate (inclined tube) grading equipment

Although the above-mentioned hydraulic classification equipment has the advantages of simple structure, low operating cost, small maintenance, less fluctuation of the input material, fewer factors tha

Read More

Pyramid pool

The pyramid pool is composed of several side-by-side reinforced concrete containers with pyramidal bottoms; there are no partitions between and inside the classification rooms, and the inclination ang

Read More