Delivery shaking tables to Ghana, One Chinese invest build rock gold plant in Ghana.
he bought crusher,ball mill,spiral classifer,shaking tables.
6-S Shaking table Working principle:
The head of the bed is of eccentric liner type (as shown in the figure). The motor drives the large belt pulley 14 to drive the eccentric shaft 7 to rotate. The rocker 5 moves up and down. The Toggle plate 6 drives the rear shaft 11 and the Reciprocating lever 2 to move backwards. The spring 9 receives compression. The bed surface is connected by the linkage seat 1 and the reciprocating bar 2, so the bed surface also moves backward at this time. When the rocker rod 5 moves upward, the bed surface moves forward because of the extension of spring 9. During the bed moving forward, the angle between the Toggle plate 6 changes from big to small, and the horizontal moving speed of the elbow plate ends changes from small to large, so the forward movement of the bed surface is from small to large. Slow and fast, on the contrary, when the bed surface recedes, the isometric motion is caused by the fast and slow motion, which can ensure that the material on the bed moves forward and is sorted according to the specific gravity.

shaking table structure










