Install
1. When the washing machine is transported by the manufacturer to your laundry room, you must first conduct a regular inspection of the industrial washing machine to check whether it is the machine you purchased and whether it is damaged or unusable during the transportation process. If there is a problem, take pictures and contact the manufacturer immediately.
2. You should determine the installation location of the washing machine before washing the machine. The selection of the installation position of the washing machine should consider the location of the transportation channel, raw material turnover, water, steam and sewage pipes. Here Xiongxing washing equipment reminds you that the washing machine should be installed in the same The dehydrator, dryer and other equipment together reduce the distance between these equipment and prevent subsequent troubles caused by improper location selection.
3. The washing machine is one of the larger and heavier laundry equipment, so the machine should be installed on a solid foundation, while maintaining a level to prevent the equipment from working due to the selection of the site and the uneven foundation of the installation location. Vibration occurs at times, which affects the washing efficiency and the service life of industrial washing machines.
4. Refer to the instruction manual of the washing machine, find the door of the electrical control cabinet of the industrial washing machine according to the relevant content in the manual, and connect it to the 380V three-phase power line and neutral line according to the mark on the terminal. 380V, it is forbidden to connect to low voltage or high voltage)
5. Refer to the label instructions of the washing machine body to connect to the water inlet pipe and steam pipe accordingly. If the steam condition is not available, the steam inlet can be blocked. If you use the steam heating function, please install a pressure indicating device and a safety device at the obvious place of the steam main pipe outside the machine.
Precautions
1. The installation of the washing machine is completed through the above 5 steps. We should also pay attention to the following issues when installing: The best installation environment for the washing machine is a dry, ventilated and clean working environment, a good working environment and extended washing The key factor of mechanical service life.
2. When installing, you should strictly refer to the installation content in the instruction manual provided by the manufacturer to perform the step-by-step operation, and do not install according to your own feelings.
3. When there is a problem during installation, the manufacturer should be contacted as soon as possible.
