Does the concentrate zone on your shaking table start to sway as soon as the machine is turned on? First, check the foundation and the vibration transmission path.
When the concentrate band fluctuates, making it difficult to maintain the desired separation position-a problem that persists even after adjusting the wash water-the investigation should not be limited to the surface of the shaking table. It is essential to simultaneously examine the condition of the head motion, the support frame, and the surrounding platform to determine whether the instability stems from the separation parameters or from external disturbances affecting the support and drive mechanisms. The mere oscillation of the concentrate band is not, in itself, proof of a foundational issue. However, if the fixed supports exhibit abnormal displacement, if there is knocking at connection points, or if adjacent equipment oscillates in synchronization, then mechanical and installation-related concerns must be addressed before evaluating the separation performance. Otherwise, adjustments to water flow and deck slope may merely mask the symptoms temporarily, while the root cause-leading to recurring operational interruptions-remains unresolved.

The deck (or bed surface) is the component that undergoes reciprocating motion; the machine frame must not be mistaken for the deck.
A shaking table achieves material stratification and transport through the reciprocating motion of the deck combined with a transverse flow of water. The head motion mechanism provides the drive, causing the deck and its associated moving parts to operate according to the design, while the underlying structural components serve to position and support the assembly. Before conducting an inspection, consult the machine's assembly drawing to verify which parts are designed to move and which are fixed; do not rely solely on the names of the components to determine their function.
Distinguish between the normal reciprocating motion of the bed surface and any abnormal oscillation of the fixed supports.
While fixed components may transmit some level of vibration-meaning not every perceptible vibration should be classified as a malfunction-phenomena such as overall displacement, intermittent lifting of the support legs from the floor, noticeable shifting at connection points, or persistent knocking are not acceptable as part of normal operation. When observing the head end, note any movement of the housing relative to its supports; when observing the bed surface, assess whether the motion is smooth and check for any abnormal lateral swaying or bouncing. Evaluations must be made against a reliably stable reference point; do not use other components-such as railings that may also be shaking-as a benchmark. Static photographs can only help identify specific parts; they cannot be used to determine the operational quality of a piece of equipment.
First, identify the type of support; only then should you address the foundation and anchoring.
Although all are classified as "shakers" (vibratory tables/screens), they may utilize independent supports, an integrated structural steel base frame, or other specialized support configurations. Some small-scale laboratory units do not require permanent anchoring, while for industrial-grade models, the installation method cannot be inferred solely from the equipment's external appearance. On-site, it is essential to verify the specific model, base frame configuration, the manufacturer's installation drawings, and the load-bearing structural requirements.
The necessity for anchor bolts, grouting, and vibration isolation measures must be determined in accordance with the specific installation requirements for the equipment in question.
For equipment designed to be anchored, verify the specifications of the connecting components, their installation positions, and their tightness. For equipment that does not require permanent anchoring, ensure that the support, leveling, and anti-displacement conditions specified by the manufacturer are met; do not perform unauthorized welding, drilling, or the addition of extra weights. The presence of shims or other materials beneath the equipment's feet does not guarantee reliable contact. It is essential to inspect the load-bearing surfaces for integrity, confirm that the support configuration aligns with the design drawings, check for any areas left unsupported (gaps), and examine the load-bearing platform for signs of deformation. If a concrete foundation exhibits cracks, damage, or settlement, the issue must be assessed by qualified professionals. In the case of steel platforms, particular attention should be paid to the connections between beams and columns as well as the overall structural rigidity; tightening the anchor bolts further is not a substitute for a proper structural assessment. Note that the support/leveling process is distinct from the adjustment of the equipment's working surface slope (process gradient); the established slope of the working surface must not be altered arbitrarily in an attempt to eliminate frame instability.
Perform inspections while the equipment is shut down, prior to any test runs.
Before accessing connection points to perform inspections, measure clearances, or tighten components, ensure that the material feed is stopped and the equipment is powered down. Follow on-site protocols to isolate energy sources-utilizing lockout/tagout (LOTO) procedures-and verify that any residual energy is controlled and that the equipment cannot be started inadvertently. Simply pressing a "stop" button is not an adequate substitute for the energy isolation required for maintenance. Test runs may only resume according to established procedures once all protective guards have been restored, tools accounted for, and personnel cleared from the area. During operation, observe the equipment only from a safe vantage point; never reach in to test for looseness, and do not attempt to tighten components while the machine is running. If equipment is already exhibiting abnormalities, do not continue operation merely to gather comparative data between no-load and loaded states; if there is visible displacement, signs of impact, or structural damage, the equipment must be shut down for corrective action. Conduct inspections systematically, section by section, from the support surfaces through to the connection points. Look for indicators such as shifted nut positions, friction marks on mating surfaces, displaced gaskets, or damage around bolt holes-though note that any single sign is insufficient to definitively diagnose a fault. Tightening sequences and torque specifications must strictly adhere to the manufacturer's documentation or an approved maintenance plan; do not rely on "feel" to apply force, and ensure that internal adjustment mechanisms (such as those found within a machine headstock) are not mistaken for-and tightened like-standard structural fasteners.
Vibration transmission paths may bypass the equipment mounts.
Focusing solely on the base can lead to overlooking external connections. Unintended rigid connections or accidental contact-such as those involving feed pipes, water lines, ore chutes, maintenance platforms, or adjacent machinery-can serve as alternative paths for vibration transmission. Additionally, check for any interference caused by the accumulation of ore material near the equipment deck; do not automatically attribute such issues to a failure of the foundation itself. During troubleshooting, systematically document all points of contact between the equipment and external structures. Observing whether platform conditions change when adjacent machines are running, or whether surrounding vibrations persist even after the equipment in question has been shut down, can help narrow down the source of the problem. Any equipment start-ups or shut-downs must be coordinated centrally on-site; do not arbitrarily stop adjacent machinery for testing, and never disconnect pipes while the system is under pressure or loaded with material. Simply adding a rubber pad is no substitute for a proper diagnosis of issues like looseness, interference, or improper load-bearing conditions. Altering the flexibility of the support structure can change the dynamic response of both the equipment and the platform; the necessity for vibration isolation-and the optimal placement of isolation components-should be determined in consultation with the manufacturer and relevant design engineers. If resonance or structural issues are suspected, professional measurement is required; conclusions cannot be drawn based solely on auditory observation or visual inspection.
Comparing no-load and loaded conditions helps identify when anomalies occur.
Once shutdown inspections and corrective measures are complete, conduct a trial run in accordance with the manufacturer's specified conditions. "No-load" does not imply that the equipment can be operated without water or lubricant; procedures regarding water supply, lubrication, operating duration, and startup sequences must still be strictly followed. Observers should remain outside the designated safety zones while recording the operating parameters, the specific location of any anomalies, and the exact time they occur. If structural displacement or knocking sounds arise during the no-load phase, investigate the installation, connections, and drive system first-do not proceed to introduce ore or apply load. If the equipment operates stably under no-load conditions but issues arise only after ore is introduced, evaluate the actual load, the distribution of material and water, and the mechanical state under load; do not prematurely conclude that the feed is unstable or the foundation is inadequate based solely on this change. Ensure that observations are made from consistent positions and under comparable operating conditions-avoid altering the stroke, slope, and feed rate simultaneously. If vibration measurements are required, they must be performed by qualified or trained personnel using methods appropriate for the specific equipment. Document the measurement points, directions, operating conditions, and instrument specifications; do not conflate the motion parameters of the machine bed with vibration readings taken from the stationary frame.
The acceptance process must account for the changes made during rectification.
gravity-separator/shaking-table/single-layer-shaking-table.html
Each inspection record should, at a minimum, document the equipment model, support configuration, the specific location of any anomalies, the circumstances under which issues were identified (e.g., during downtime), the corrective measures taken, and the results of follow-up testing. Verification must begin by confirming that the connection and load-bearing conditions meet specifications, followed by an assessment of mechanical operation and sorting performance. A tidy appearance of the concentrate belt-even if observed over a short period-cannot serve as a substitute for a formal mechanical acceptance. Acceptance must be based on the specific requirements for the unit in question and verifiable operational records, rather than on generalized parameters such as amplitude, torque, or foundation dimensions. If anomalies persist despite installation rectifications-or if issues involve the foundation, support platform, or the drive mechanism at the head of the machine-a joint review by the manufacturer and relevant technical specialists is required. Only when the root causes of any anomalies have been explained and follow-up testing confirms that requirements are met can the equipment be considered to have a reliable foundation for continued commissioning and sorting operations.







