The three-disk magnetic separator is a common magnetic separation equipment. The following is a detailed answer to its structure, working principle, product advantages, usage scenarios and precautions:
1. Structure The three-disk magnetic separator is mainly composed of a turntable, a magnetic field, a transmission device, a base and other parts. In addition, there are also three-disk belt magnetic separators, which mainly consist of three upper, middle and lower disks and a belt conveyor.
2. Working principle The working principle of the three-disk magnetic separator: the turntable is fixed on the transmission device, and the magnetic field is fixed around the turntable through the magnetic field fixing device. When the turntable rotates, the magnetic field will rotate accordingly, sending the material into the magnetic field area. The magnetic substances in the material are adsorbed on the turntable under the action of the magnetic field, and the non-magnetic substances are discharged from the top of the turntable. As the turntable rotates, the magnetic material adsorbed on the turntable will be removed at the discharge port, thereby achieving the purpose of magnetic separation. The working principle of the three-disc belt magnetic separator: after the ore is crushed and screened, it is sent to the magnetic separator through the conveyor belt. During the operation of the conveyor belt, non-magnetic minerals and magnetic minerals are separated by adjusting the magnetic strength and arrangement of each disk. After separation, the magnetic minerals adhere to the conveyor belt for collection, while the non-magnetic minerals continue to fall from the conveyor belt.
3. Product advantages It has simple structure, easy maintenance and stable operation. The magnetic separation effect is good and can effectively separate magnetic substances from non-magnetic substances. It has a wide range of applications and can be used in fields such as mineral processing, coal preparation, and environmental protection.
4. Usage scenarios The three-disk magnetic separator is suitable for the separation of various magnetic materials, such as Tin,Tantalum niobium,zircon,tungsten,limonite,rutile,monzaite,garnet, iron ore, manganese ore, hematite, etc. At the same time, it can also be used for magnetic separation in coal, scrap steel, scrap iron recycling and other fields. In the field of environmental protection, it can be used for the removal of magnetic particles in wastewater, garbage classification, etc.
5. Things to note Before use, the equipment needs to be inspected and maintained to ensure that the equipment is operating normally. Check and adjust the tightness of the neck shaft and belt of the mechanical transmission part to ensure smooth transmission. Ensure that the parameters of feed and water flow are within the working range of the equipment, and keep the water flow stable to ensure the normal operation of the equipment. When using it, you should pay attention to the power and water source of the device to ensure its normal operation. Due to the strong magnetic field of the magnetic separator, care should be taken to avoid direct contact between body organs and the disk to avoid injury.
