mily@benefication.com    +8618379873189
Cont

Have any Questions?

+8618379873189

Feb 27, 2025

Tungsten Ore Processing Flowchart

Tungsten Ore Processing Flowchart
Below is a generalized flowchart for separating tungsten ore (applicable to both wolframite and scheelite), with variations noted based on mineral type:


1. Comminution

Crushing: Jaw/cone crushers reduce ore to ≤10 mm.

Grinding: Ball mills grind ore to 50–150 µm to liberate tungsten minerals.


2. Pre-Concentration

Screening/Jigging: Remove coarse gangue early (e.g., jigs for gravity pre-concentration).


3. Primary Concentration

Gravity Separation:

Shaking tables, spirals chutes, or centrifugal concentrators exploit high density of tungsten minerals.

Produces a rough concentrate (20–50% WO₃).

wet shaker table


4. Secondary Separation

For Wolframite (Fe/MnWO₄):

Magnetic Separation: Use low-intensity magnets to separate wolframite (weakly magnetic) from non-magnetic gangue.

For Scheelite (CaWO₄):

Froth Flotation:

Collectors: Fatty acids (e.g., oleic acid).

Depressants: Sodium silicate for silica/calcite suppression.

Removes sulfides (if present) first, then floats scheelite.

copper flotation machine


5. Cleaning and Scavenging

Multi-Stage Processing:

Re-process middlings/tailings to improve recovery.

Final concentrate: 60–70% WO₃.

Send Inquiry