The washing equipment is prone to water seepage and leakage due to long working hours. It must be maintained regularly and cannot be operated at overpressure. The wires must be checked and not aging. In addition, the button collector must be checked after the equipment is used up, and the parts must be regularly lubricated. ,extend your life. Next, I will introduce you to the detailed content.
1. The safety hazards of washing equipment
1. Due to long-term work and cleaning linen with different acidity, it is easy to seep and leak water, and it is also possible that the lubricating oil that is usually filled can drip into the inner cylinder of the washing machine and soil the linen. Therefore, the washing equipment needs regular maintenance.
2. The steam pressure gauge of the washing equipment shows a pressure of 4 kg, but the clothes will not dry, indicating that the siphon of the rotating head or the trap on the condenser tube is malfunctioning. If it is eliminated, the drying time of the linen will be greatly shortened. . Care must be taken not to operate at overpressure.
3. The drying effect of the washing equipment is not good, because the air ducts have not been cleaned for a long time, and the lint of the sheets and towels are filled with the passages, which makes the ventilation not smooth. Clean up.
4. The brake pads of the water washing equipment are more severely worn. Find and replace the brake pads in time. If not replaced in time, the chassis of the dehydrator will be worn out and the dehydrator will be damaged.
5. At the end of the laundry room every day, pay attention to cleaning all corners of the laundry room, so that mosquitoes have nowhere to hide, and create a clean laundry room.
6. At ordinary times, pay more attention to whether the steam pipe is leaking, the water pipe is leaking, and the wire of the washing machine is aging. These are the hidden dangers lurking in the laundry equipment.
Second, the maintenance method of washing equipment
1. The button collector should be cleaned after a washing cycle to reduce the burden of the pump, prevent the pump from blocking the base, and extend the life of the pump. After every three washing cycles, the cilia collector should be cleaned to increase the air flow during drying and shorten the drying time. Reduce the adhesion of cilia on the recovery condenser and reduce the corrosion of the recovery condenser.
2. Check the pneumatic triplex every day to drain the water to prevent moisture from entering the solenoid valve and the valve, causing them to be damaged prematurely. Add lubricating oil when the oil level is insufficient to ensure adequate lubrication of each bearing of the washing equipment and prolong the life of the bearing.
3. Check the working pressure of the filter at any time. When the pressure reaches or exceeds 1.5-2KG square centimeters, the filter should be cleaned to reduce the outlet pressure of the pump to extend the life of the pump. Clean the distillation box once every 5-8 times of distillation. Thereby increasing the distillation speed, but also reducing the corrosion of the sludge to the bottom plate, to achieve the purpose of extending the life of the distillation box.
The above is an introduction to "what are the hidden dangers of washing equipment and how to maintain it", I hope it can help you.
